• Solid Shine lamp free, Laser light source technology
• 10,000 ANSI Lumen, 4:3 WXGA (1024 x 768) native resolution
• 10,000:1 Contrast ratio
• Video In: HDMI, DVI-D, VGA, 5BNC, Digital Link
• Built-in Wired network, Geometric adjustment
• Support 24/7 operation, Daylight View 3 technology, 360 degree installation, Multi-screen system, DICOM simulation mode and a wide selection of optional lenses
Stellar Projection For Marathon Missions
Versatile High-Brightness Projectors Engineered for Elite Performance
With immersive pictures and practical features, application for the PT-RZ970 Series extends from long-term installation in museums, theaters, and control rooms through to roles in signage, exhibition, and staging. Powered by acclaimed SOLID SHINE Laser and next-generation 1-Chip DLP™ technology, the PT-RZ970 Series delivers low-maintenance stability and accurate color performance for longer than competitive products.
Reproducing Full-Spectrum Color with 1-Chip DLP™ SOLID SHINE Laser
With next-generation DLP™ technology delivering high-resolution detail, dual laser modules for high brightness, Quartet Color Harmonizer to reduce energy loss from the light source, and robust heat-resistant phosphor wheel, Panasonic’s 1-Chip DLP™ SOLID SHINE Laser system produces scintillating images with unfailing reliability.
Superior White Balance and Color Reproduction
Quartet Color Harmonizer wheel mechanism captures a wider color space than comparable projectors, allowing white to be reproduced more realistically on screen. Conventional projectors can’t achieve an accurate white balance, so images can appear with a distracting greenish cast. Not the case with the Panasonic 1-Chip DLP™ SOLID SHINE Laser projectors.
SOLID SHINE Laser Maintains Picture Quality for Longer
Thanks to two long-lasting solid-state laser modules, there are no lamps to replace, and image color/brightness degrades very gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality is preserved for longer.
Dual-Laser Optical Engine Assures Failsafe Reliability
Dual-Drive Laser Optical Engine groups laser diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss should a laser diode fail, making supported products ideal for applications where picture presentation must be maintained.
Lasting Picture Quality
Dustproof Optics Extend Longevity
Hermetically sealed laser modules and a refined air-intake system work to extend life and maintain picture quality in dusty locations. SOLID SHINE Laser products are tested against more severe guidelines than other projectors for stable operation in dusty environments containing 0.150 mg of particulate matter per cubic meter*.
* Dustproof tests are conducted to confirm operational effectiveness under conditions with 0.15 mg/m3 of particulate matter (based on tests by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers [ASHRAE], and the Japanese Building Maintenance Association). Measurements are made using acceleration tests.
Selectable Operational Modes
Select your preferred operational mode to balance control brightness decline with brightness output according to the specific requirements of individual applications.
Dynamic Light Control for High Contrast
Dynamic Light Control directly modulates laser output to achieve high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures highly precise adjustment of light output, while accurate contrast is delivered even when bright and dark scenes frequently interchange.
Detail Clarity Processor 3
This unique Panasonic circuitry optimizes the sharpness of each image based on information gathered from four frequency bands of the video signal. The resulting images are expressed with natural, convincing realism.
System Daylight View 3
Panasonic’s premium System Daylight View 3 stops pictures washing out in bright light and enhances impact in mapping and multi-projector applications. It uses sensor information to adjust sharpness, manipulate gamma curves, and correct colors to suit on-site conditions.
Easy System Flexibility
Free 360-degree Installation
SOLID SHINE Laser technology enables free 360-degree installation through any axis. Together with powered lens shift and a wide range of optional lenses, the projector can be mounted in any way desired without picture distortion temporarily or in permanent applications.
Contrast Sync and Shutter Sync Function
Contrast Sync function, designed for multi-screen applications, allows dynamic contrast control to be synchronized for consistent picture quality across screens. Shutter Sync, meanwhile, synchronizes shutter on/off timing.
* Includes fade-in and fade-out effects. Projector shutter functions can be set to operate individually if desired.
Single-Cable DIGITAL LINK Connection
DIGITAL LINK transmits uncompressed video, audio*1, and control commands through a single CAT 5e or higher STP cable for distances of up to 150 m (492 ft)*2. Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.
*1 Audio transmission depending on model’s audio capability.
*2 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080p.
Backup Input Setting Assures Picture Display
Projectors switch instantaneously to a backup input signal should the primary input signal be disrupted*, assuring image display is maintained at all times in venues such as control rooms and adding insurance at events where projection must not be interrupted.
* Combination of primary/secondary input terminals is fixed. Switching to secondary input (or primary input) occurs automatically when the input signal for primary input (or secondary input) is disrupted. The Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.
Early Warning Software ET-SWA100 Series (Optional)
Early Warning Software monitors the status of projectors and displays connected to an intranet, and informs the operator when an abnormality is detected or predicted, or when there are symptoms of trouble. This minimizes downtime to provide more stable operation.
Common Lenses for Panasonic 1-Chip DLP™ Projectors
Panasonic 1-Chip DLP™ projectors share a family of optional lenses, including ultra-short-throw lens and zoom lens for long throw distances, reducing cost of ownership for staging and event companies with large projector inventories.
- Quick Start and Quick Off
- Laser Safety Guaranteed
- Built-in Geometric Adjustment
- Multi-screen Support System
- Multi-Unit Brightness and Color Control
- Multi Monitoring & Control Software
- Art-Net DMX, Crestron Connected™, and PJLink™
- DICOM Simulation Mode
|Panasonic PT-RX110 XGA 10000 Lumens Digital Link Laser 1-Chip DLP Projector|
|Power supply||100–240 V AC, 10.4–5.0 A, 50/60 Hz|
|Power consumption *1||1,050 W (0.3 W with Standby Mode set to Eco, 3 W with Standby Mode set to Normal, 85 W with Quick Startup set to ON); 742 W (Normal Mode), 617 W (Eco Mode), 410–588 W (Long Life 1 Mode), 375–588 W (Long Life 2 Mode), 349–588 W (Long Life 3 Mode), 82 W (Shutter Mode)|
|Panel size||17.8 mm (0.7˝) diagonal (4:3 aspect ratio)|
|Display method||DLP™ chip x 1, DLP™ projection system|
|Pixels||786,432 (1024 x 768) pixels|
|PT-RX110||Powered zoom (throw ratio 1.8–2.4:1), powered focus, F 1.7–1.9, f 25.6–35.7 mm|
|PT-RX110L||Optional powered zoom/focus and fixed-focus lens|
|Light source||Laser diodes (Class 1) (Class 3R for US models), light source life *2: 20,000 hours (Normal Mode*) / 24,000 hours (Eco Mode). At this time, brightness will have decreased to approximately half its original level [Operating temperature: 30 °C (86 °F), altitude: 700 m (2,297 ft), dust density 0.15 mg/m 3, Dynamic Contrast Mode: 3]
*Includes Quiet 1/Quiet 2 Mode.
|Screen size (diagonal)||1.27–15.24 m (50–600˝), 1.27–5.08 m (50–200˝) with ET-DLE055, 2.54–8.89 m (100–350˝) with ET-DLE030, 4:3 aspect ratio|
|Brightness||10,400 lm (Center) *3 / 10,000 lm *2 / 8,500 lm (Quiet 1) *2 / 6,400 lm (Quiet 2) *2|
|Contrast *2||10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)|
|Resolution||1024 x 768 pixels (Input signals that exceed supported resolution will be converted.)|
|Supported RGB signal||XGA~WUXGA|
|Supported video signal||NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i|
|Keystone correction range *4||Vertical: ±40 ° (±30 ° with ET-DLE085/DLE055, +5 ° with ET-DLE030), horizontal: ±15 ° (cannot be operated with ET-DLE030)|
|Keystone correction range with optional Upgrade Kit ET-UK20 *4||–|
|Installation||Ceiling/floor, front /rear, free 360-degree installation|
|Cabinet materials||Molded plastic|
|Dimensions (W x H x D)|
|PT-RX110||498 x 200 *5 x 581 mm (19 19/32˝ x 7 7/8˝ *5 x 22 7/8˝) (with supplied lens [DLE170])|
|PT-RX110L||498 x 200 *5 x 538 mm (19 19/32˝ x 7 7/8˝ *5 x 21 3/16˝) (without lens)|
|PT-RX110||Approximately 23.2 kg (51.1 lbs) (with supplied lens [DLE170])|
|PT-RX110L||Approximately 22.4 kg (49.4 lbs) (without lens)|
|Operation noise *2||41 dB (37 dB [Quiet1] / 35 dB [Quiet2])|
|Operating environment||Operating temperature: 0–45 °C (32–113 °F) *7,
operating humidity: 10–80 % (no condensation)
|Applicable software||Logo Transfer Software, Multi Monitoring Control Software, Early Warning Software|
*1 Operating temperature 25 °C (77 °F), altitude 700 m (2,297 ft), IEC62087: 2008 Broadcast Content, Picture Mode: Standard, Dynamic Contrast: 2.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards.
*3 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012. Value is average of all products when shipped. May differ depending on actual unit.
*4 Range varies depending on mounted lens.
*5 With legs at shortest position.
*6 Average value. May differ depending on the actual unit.
*7When used in locations from 0 m to 4,200 m (0 ft to 13,780 ft) above sea level in Normal Mode, and from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level in other modes. If the ambient temperature exceeds 30 °C (86 °F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, the light output may be reduced to protect the projector.
*8 Geometry Manager Pro software is available only with PT-RZ970/RZ970L.
*9 ET-UK20 Series is available only with PT-RZ970/RZ970L.
*10 ET-CUK10 Series is available only with PT-RZ970/RZ970L. Available worldwide except the United States.