Loading... Please wait...

Categories

Our Newsletter


Onkyo A-9070 Audiophile Integrated Amplifier

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Price:
$1,999.00
SKU:
AM-ON-A-9070B
Brand:
Availability:
Usually dispatched onto Courier Transport within 24-36hrs. Transit time location dependent.
Shipping:
Free Shipping


Scroll To Top

Product Description

3 Year Australian Warranty
Delivery insurance included within Australia!
Australian Model
Authorised Onkyo Internet Dealer
Technical Support 1800 818 360

Key Features

 2 x 180 Watts per channel (JEITA)

 3 Digital Audio Inputs (1 Optical and 2 Coaxial)

 AWRAT (Advanced Wide Range Amplifier Technology)

 Struts to Reduce Vibration

 DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry)

 

Power and Clarity in One Sophisticated Device. Boasting the combined capabilities of a pre-amp and a power amp, the A-9070 is an amplifier with a difference.

"This is a great sounding receiver that doesn't seem to be getting much attention. It's a modern version of older "built like tank" amps of the 70's. Do a Google image search and take a look inside. It's got a massive transformer, huge heat sinks, and big capacitors. Then take a look at the power supply and heat sinks of other amps claiming 75 W per channel (8 ohms). This unit has a bigger power supply for 2 channels than most have for 7 channels! I was almost going to buy a two channel receiver from a different "high end" brand that was also rated at 75 W. Then I noticed that the Onkyo is over TWICE AS HEAVY as the other one. After taking a look inside I found out why. Oh yeah, the Onkyo also sounds better."

 

Onkyo A9070 Front

 

Download Brochure
Download Manual

 

Power and Clarity in One Sophisticated Device

Onkyo has declared war on distortion. The success of its campaign against noise is evident the moment you switch on the A-9070 Integrated Stereo Amplifier. New DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) dampens super high frequency distortion. Closed ground-loop circuits, HICC (High Instantaneous-Current Capability), and vibration-damping construction combine to produce a startlingly pure sound across a wide dynamic range. The unit's four 15,000 µF capacitors keep plenty of power at the ready. Efficient parallel push-pull amplification paired with three-stage inverted Darlington circuitry works at reducing distortion to almost nil. Separate Wolfson® 192 kHz/24-bit DACs for both left and right channels improve performance. The unit is also equipped with 192 kHz/24-bit HD audio playback to handle modern formats. Four discrete amplifier modes—integrated amp, power amp, pre-amp, and split pre-amp/power amp—offer flexibility when integrating other hi-fi components. Details like an independent headphone amplifier, a phonograph equalizer, three digital audio inputs, four analog inputs, and gold-plated audio terminals/speaker posts speak of the highest build quality. The superb craftsmanship, technological refinement, and attention to detail invested in the A-9070 make it worthy of serious consideration for those in the market for top-shelf hi-fi gear.

Onkyo A9070 Rear

AWRAT (Advanced Wide Range Amplifier Technology)

The A-9070 employs a host of proprietary Onkyo technologies to ensure optimal audio performance.

1. DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry)
Despite being beyond the normal range of human hearing, frequencies above 100 kHz are susceptible to clock pulse and other forms of distortion from digital devices. Such distortion in the super high frequency range can generate "beat interference", which in turn affects the character or atmosphere of the original sound. By improving linearity and reducing distortion in the super-high frequency range, Onkyo's new DIDRC technology effectively reduces perceptible noise.

2. Low Negative-Feedback Design
Too much NFB makes a system susceptible to counter-electromotive force from the speakers, resulting in a drop in perceived sound quality. To avoid this, Onkyo focuses on improving the frequency response and reducing distortion, without relying so much on NFB.

3. Closed Ground-Loop Circuits
The A-9070 employs a sophisticated closed-circuit design in which each circuit has a separate link to the power supply. This helps to cancel individual circuit noise and keep the ground potential free of distortion.

4. HICC (High Instantaneous-Current Capability)
Handling current loads up to 100 amperes, HICC enables an amplifier to immediately cancel the speakers' reflex energy and instantaneously send out the next signal. The same high current required to achieve this also supports the amplifier's ability to handle speaker impedance fluctuations.

5. Symmetrical Twin-Monaural Construction
Power devices for the left and right channels of the A-9070 are aligned symmetrically. Each channel has the same electrical and structural design, and signal pathways are uniform in length. This helps to minimize errors in stereophonic playback.

 

Onkyo A9070 Inside

 

Parallel Push-Pull Amplification Design with Three-Stage Inverted Darlington Circuitry

With parallel "push-pull" amplification, the amplifier's transistors alternately "push" and "pull" the current. In pairs, one output device (a transistor) will amplify the positive half of the waveform, while another output device amplifies the negative. Push-pull amplification is highly efficient, but can be affected by occasional instances of distortion. This is where the three-stage inverted Darlington circuitry comes in. Three-stage inverted Darlington circuitry actively works to reduce distortion by employing a low negative-feedback design to maintain voltage stability and enhance transient response. It's extremely sensitive to oscillations and requires sophisticated control technology. Together with the push-pull amplifier design, the three-stage inverted Darlington Circuitry shapes a clean, consistent signal to send to the outputs.

 

Four Amplifier Modes for the Ultimate in Versatility

Boasting the combined capabilities of a pre-amp and a power amp, the A-9070 is an amplifier with a difference. At the turn of a knob, it can be configured to run in any one of four distinct modes. Depending on how you want to integrate it into your hi-fi system, you can use it as an integrated amp, as a power amp, or as a pre-amp. On top of that, you can also set up the A-9070 in split mode. This enables the pre-amp and power amp to work separately, so you can incorporate another device, such as an equalizer.

 

In The Box

  • Onkyo A9070 Stereo Amplifier
  • IR Remote Control
  • 2 x AAA Batteries
  • AC Power Cord
  • Instruction Manual

 

Onkyo A9070 Remote


Warranty Information

3 Year Australian Warranty

Other Details

Power Output:
140 W/Ch (4 ë©, 20 Hz‰ÛÒ20 kHz, 0.05%, 2 channels driven, IEC) 75 W/Ch (8 ë©, 20 Hz‰ÛÒ20 kHz, 0.05%, 2 channels driven, IEC) 180 W/Ch (4 ë©, 1 kHz, 10%, 2 channels driven, JEITA) 110 W/Ch (8 ë©, 1 kHz, 10%, 2 channels driven, JEITA)
Dynamic Power:
450 W (1 ë©), 310 W (2 ë©), 230 W (3 ë©), 180 W (4 ë©), 100 W (8 ë©)
THD+N (Total Harmonic Distortion + Noise):
0.006% (Half power) 0.03% (1 kHz, 1 W Output) 0.008% (20 Hz‰ÛÒ20 kHz, Half power) 0.03% (20 Hz‰ÛÒ20 kHz, 1 W Output)
Damping Factor:
130 (1 kHz, 8 ë©)
Input Sensitivity and Impedance:
150 mV/47 kë© (Line) 2.25 mV/47 kë© (Phono MM) 0.18 mV/100 ë© (Phono MC)
Rated RCA Output Level and Impedance:
1 V/300 ë© (Pre out)
Maximum RCA Output Level and Impedance:
5 V/300 ë© (Pre out)
Phono Overload:
70 mV (MM, 1 kHz, 0.5%) 5.2 mV (MC, 1 kHz, 0.5%)
Frequency Response:
10 Hz‰ÛÒ100 kHz/+0 dB, -1 dB (1 W, Line) 1 Hz‰öÕ250 kHz//+0 dB, -3 dB (1 W, 8 ë©)
Tone Control:
å±10 dB, 80 Hz (Bass) å±10 dB, 10 kHz (Treble)
Signal-to-Noise Ratio:
107 dB (Line, IHF-A) 60 dB (Phono MM, IHF-A) 70 dB (Phono MC, IHF-A)
Speaker Impedance:
4 멉ÛÒ16 ë© (A or B), 8 멉ÛÒ16 ë© (A + B)
Power Supply:
AC 230 V~, 50 Hz
Power Consumption:
290 W
Standby Power Consumption:
0.2W
Dimensions (W x H x D):
435 x 174.5 x 431 mm
Weight:
18.1 kg

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the Onkyo A-9070 Audiophile Integrated Amplifier to your wish list.

Related Products

You Recently Viewed...